configure TMS to Use SAP's Quality Assurance Functionality

Configure TMS to Use SAP's Quality Assurance Functionality

A Quality Assurance system must have a) a delivery route leading from it to

another instance, and b) be the target of a consolidation route. See topic

Using Target Groups to Transport to Mulitple Clients in Two Different Instances

to fulfill the a) requirement.

1.      Log on to client 000 of your TMS Domain Controller SAP Instance.

2.      Go to transaction STMS.

3.      On the Transport System Management screen, click Overview -> Transport

    Routes.

4.  On the Display Transport Routes screen, click Display<>Change button to

    toggle into change mode.  Click on the instance in which you want to control

 QA.  Normally, this is QAS and the instance to be controlled is PRD. Under

 Transport Routes, click on the QAS instance and click Create.

5.  On the Create Transport Route screen, make sure Delivery is "on" and fill in

    Source and Delivery systems with QAS and PRD.  Click the green check mark to

 save. Now you have met condition a.
6.  Back on the Change Transport Routes screen, click on the QAS instance and

 click the single pencil Change button. You will see a Change System

 Attributes popup. Click "on" Quality Assurance - Delvery After Confirmation.

 If you want to change the people who OK the transports, click the

 Procedure button and make your changes. Then back out.  Click the green check

 to Transfer your changes.

7.  Back on the Change Transport Routes screen, click on the Target Groups line

    and click the Create button.  

8.  In the Create Transport Group popup, fill in the Target Group as /XXXCLNTS/,

    give a Short Description and click the Client Assignment button.  Be aware

    that the Target Group name must start and end with a “/”.  Enter each Target

    system and Target client you need.  Click the green check mark to Transfer.

    You now have a target group. Now you must create a Consolidation Layer.

9.  Back on the Change Transport Routes screen, click on Transport Routes and

    click Create.

10. In the Create Transport Route popup, click the Extended Transport Control

 button at the bottom of the popup.  Make sure Consolidation is "on" and fill

 in the information using our Target Group as the Consolidation Target.  Click

 the green check button to Save the change.

11. You now have a Transport Group.  Confirm the Disturbution of it to the other

    SAP Instances. 

12. You may now leave the STMS transactions.